Anti-patterns in DataStax Enterprise 

Implementation or design patterns that are ineffective and/or counterproductive in DataStax Enterprise production installations. Correct patterns are suggested in most cases.

Storage area network 

SAN storage is not recommended for on-premises deployments.

Note: Storage in clouds works very differently. Customers should contact DataStax for questions.
Although used frequently in Enterprise IT environments, SAN storage has proven to be a difficult and expensive architecture to use with distributed databases for a variety of reasons, including:
  • SAN ROI (return on investment) does not scale along with that of DataStax Enterprise, in terms of capital expenses and engineering resources.
  • In distributed architectures, SAN generally introduces a bottleneck and single point of failure because the database's IO frequently surpasses the array controller's ability to keep up.
  • External storage, even when used with a high-speed network and SSD, adds latency for all operations.
  • Heap pressure is increased because pending I/O operations take longer.
  • When the SAN transport shares operations with internal and external DataStax Enterprise traffic, it can saturate the network and lead to network availability problems.

Taken together these factors can create problems that are difficult to resolve in production. In particular, new users deploying DataStax Enterprise with SAN must first develop adequate methods and allocate sufficient engineering resources to identify these issues before they become a problem in production. For example, methods are needed for all key scaling factors, such as operational rates and SAN fiber saturation.

Network attached storage 

Storing SSTables on a network attached storage (NAS) device is not recommended. Using a NAS device often results in network related bottlenecks resulting from high levels of I/O wait time on both reads and writes. The causes of these bottlenecks include:

  • Router latency.
  • The Network Interface Card (NIC) in the node.
  • The NIC in the NAS device.

If you are required to use NAS for your environment, contact the DataStax Services team.

CPU frequency scaling 

Recent Linux systems include a feature called CPU frequency scaling or CPU speed scaling. It allows a server's clock speed to be dynamically adjusted so that the server can run at lower clock speeds when the demand or load is low. This reduces the server's power consumption and heat output (which significantly impacts cooling costs). Unfortunately, this behavior has a detrimental effect on servers running DataStax Enterprise because throughput can get capped at a lower rate.

For more information, see Disable CPU frequency scaling.

Excessive heap space size 

DataStax recommends using the default heap space size for most use cases. Exceeding this size can impair the Java virtual machine's (JVM) ability to perform fluid garbage collections (GC). The following table shows a comparison of heap space performances reported by a DataStax Enterprise user:

Heap CPU utilization Queries per second Latency
40 GB 50% 750 1 second
8 GB 5% 8500 (not maxed out) 10 ms

For information on heap sizing, see Tuning Java resources.

DSE's rack feature in single-token architecture deployments 

This information applies only to single-token architecture, not to virtual nodes. See Data distribution and replication.

Defining one rack for the entire cluster is the simplest and most common implementation. Multiple racks should be avoided for the following reasons:

  • Most users tend to ignore or forget rack requirements that racks should be organized in an alternating order. This order allows the data to get distributed safely and appropriately.
  • Many users are not using the rack information effectively. For example, setting up with as many racks as nodes (or similar non-beneficial scenarios).
  • Expanding a cluster when using racks can be tedious. The procedure typically involves several node moves and must ensure that racks are distributing data correctly and evenly. When clusters need immediate expansion, racks should be the last concern.

To use racks correctly:

  • Use the same number of nodes in each rack.
  • Use one rack and place the nodes in different racks in an alternating pattern. The rack feature benefits from quick and fully functional cluster expansions. Once the cluster is stable, you can swap nodes and make the appropriate moves to ensure that nodes are placed in the ring in an alternating fashion with respect to the racks.

Also see Data replication.

SELECT ... IN or index lookups 

SELECT ... IN and index lookups (formerly secondary indexes) should be avoided except for specific scenarios. See When not to use IN in SELECT and When not to use an index in Indexing.

Using the Byte Ordered Partitioner 

The Byte Ordered Partitioner (BOP) is not recommended.

Use virtual nodes instead. Vnodes allow each node to own a large number of small ranges distributed throughout the cluster. Using vnodes saves you the effort of generating tokens and assigning tokens to your nodes. If not using vnodes, these partitioners are recommended because all writes occur on the hash of the key and are therefore spread out throughout the ring amongst tokens range. These partitioners ensure that your cluster evenly distributes data by placing the key at the correct token using the key's hash value.

Reading before writing 

Reads take time for every request, as they typically have multiple disk hits for uncached reads. In work flows requiring reads before writes, this small amount of latency can affect overall throughput. All write I/O in the database is sequential so there is very little performance difference regardless of data size or key distribution.

Load balancers 

The database was designed to avoid the need for load balancers. Putting load balancers between DataStax Enterprise and clients is harmful to performance, cost, availability, debugging, testing, and scaling. All high-level clients, such as the Java and Python drivers for DataStax Enterprise, implement load balancing directly. For available drivers, see DataStax drivers

Insufficient testing 

Be sure to test at scale and production loads. This the best way to ensure your system will function properly when your application goes live. The information you gather from testing is the best indicator of what throughput per node is needed for future expansion calculations.

To properly test, see Testing your DataStax Enterprise cluster before production. Also look at the Netflix case study, which shows an excellent testing example.

Too many tables 

Substantial performance degradation can be caused by having too many tables in a cluster. Because performance is influenced by a range of other factors, it is difficult to determine a universal table threshold; however, Datastax provides the following guidelines:

  • Warning threshold: 200 tables. The cluster may run smoothly above this threshold, but once your database reaches the warning threshold, it's time to start monitoring and planning a re-architecture. If possible, remove unused and underutilized tables.
  • Failure threshold: 500 tables. On a cluster that has exceeded 500 tables, expect problems and errors, including (but not limited) issues related to high memory usage and compactions.
Note: The table thresholds have additional dependencies on JVM Heap and the byte count. Each table uses approximately 1 MB of memory. For each table being acted on, there is a memtable representation in JVM Heap. Tables with large data models increase pressure on memory. Each keyspace also causes additional overhead in JVM memory; therefore having lots of keyspaces may also reduce the table threshold.

Lack of familiarity with Linux 

Linux has a great collection of tools. Become familiar with the Linux built-in tools. It will help you greatly and ease operation and management costs in normal, routine functions. The essential list of tools and techniques to learn are:

  • Parallel SSH and Cluster SSH: The pssh and cssh tools allow SSH access to multiple nodes. This is useful for inspections and cluster wide changes.
  • Passwordless SSH: SSH authentication is carried out by using public and private keys. This allows SSH connections to easily hop from node to node without password access. In cases where more security is required, you can implement a bastion host and/or VPN.
  • Useful common command-line tools include:
    • dstat: Shows all system resources instantly. For example, you can compare disk usage in combination with interrupts from your IDE controller, or compare the network bandwidth numbers directly with the disk throughput (in the same interval).
    • top: Provides an ongoing look at CPU processor activity in real time.
    • System performance tools: Tools such as iostat, mpstat, iftop, sar, lsof, netstat, htop, vmstat, and similar can collect and report a variety of metrics about the operation of the system.
    • vmstat: Reports information about processes, memory, paging, block I/O, traps, and CPU activity.
    • iftop: Shows a list of network connections. Connections are ordered by bandwidth usage, with the pair of hosts responsible for the most traffic at the top of list. This tool makes it easier to identify the hosts causing network congestion.

Running without the recommended settings 

Be sure to use the recommended settings.

Using DSE Search on DSE Tiered Storage tables 

DataStax recommends not using DSE Search on DSE Tiered Storage tables. The data sets used by DSE Tiered Storage can be very large. Common use cases appropriate for DSE Tiered Storage are described in this DataStax blog post.