enabled |
Enables (1) or disables (0) the SNMP plugin instance.
Default: 0 (disabled). |
levels |
Comma-delimited list of event severities that the SNMP
plugin should fire for. If not specified, all levels are
listened for by default. Available options:
- DEBUG
- INFO
- WARN
- ERROR
- CRITICAL
- ALERT
|
clusters |
Comma-delimited list of cluster names that the plugin
should fire for. If no cluster is specified, the alert is
called for events on all clusters by default. |
engine_id |
SNMP engine ID that uniquely identifies the SNMP engine.
The last four octets of the ID (01:02:03:04 by default) must
be unique between multiple OpsCenter installations. Default:
80:00:00:00:05:01:02:03:04 for the Octets default format
scheme. SNMP version is not relevant to this setting. For
more details on SNMP management, see RFC3411. |
Format Schemes |
The fifth octet in the engine_id
determines the format scheme that specifies the nature of
the remaining trailing octets. Available format schemes:
01 : IPv4 Address scheme
02 : IPv6 Address scheme
03 : MAC Address scheme
04 : Text Address scheme
05 : Octets scheme (default)
|
target_ip |
IPv4 address of the SNMP trap target. Default:
127.0.0.1 Note: Only IPv4 is supported at this
time.
|
target_port |
Listening port on the SNMP manager to receive SNMP traps.
Default: 162. |
use_snmpv3 |
When set to 1, this SNMP plugin instance will use the
SNMPv3 configuration options (username ,
auth_protocol ,
auth_key ,
privacy_protocol ,
privacy_key ) with SNMP authentication.
When set to 0, this SNMP plugin instance will use the
community_name with SNMPv1/2c
authentication. Default: 0 (uses SNMPv1/2c). |
community_name |
SNMPv1/2c-specific configuration. Community name for
authentication with the SNMP trap target. Default:
public . |
user |
Username for SNMPv3 authentication. Default:
opscusername . |
auth_protocol |
SNMPv3 authentication hashing algorithm. Specifies the
authentication protocol to use with SNMPv3. Available
options:
|
auth_key |
SNMPv3 authentication key. Authentication key as
configured for your OpsCenter installation in your
monitoring software. Default:
auth1key . |
privacy_protocol |
SNMPv3 privacy protocol. Available standards-compliant options:
Available Extended Security Options
(ESO) from the SNMP Research Group:
|
privacy_key |
Privacy key as configured for your OpsCenter install in
your monitoring software. Default:
privkey1 . |