Upgrades for DataStax Enterprise 4.8.x patch releases

Steps for upgrading DataStax Enterprise 4.8 between patch (point) releases.

Review this information on upgrading DataStax Enterprise (DSE) between patch (point) releases, such as upgrading from DataStax Enterprise 4.8.4 to 4.8.12.

Attention: Read and understand these instructions before upgrading. Carefully reviewing the planning and upgrade instructions can prevent errors and data loss.

DataStax Enterprise and Apache Cassandra configuration files

Configuration file Installer-Services and package installations Installer-No Services and tarball installations
DataStax Enterprise configuration files
dse /etc/default/dse (systemd) or /etc/init.d/ (SystemV) N/A. Node type is set via command line flags.
byoh-env.sh /etc/dse/byoh-env.sh install_location/bin/byoh-env.sh
dse.yaml /etc/dse/dse.yaml install_location/resources/dse/conf/dse.yaml
logback.xml /etc/dse/cassandra/logback.xml install_location/resources/logback.xml
spark-env.sh /etc/dse/spark/spark-env.sh install_location/resources/spark/conf/spark-env.sh
spark-defaults.conf /etc/dse/spark/spark-defaults.conf install_location/resources/spark/conf/spark-defaults.conf
Cassandra configuration files
cassandra.yaml /etc/dse/cassandra/cassandra.yaml install_location/conf/cassandra.yaml
cassandra.in.sh /usr/share/cassandra/cassandra.in.sh install_location/bin/cassandra.in.sh
cassandra-env.sh /etc/dse/cassandra/cassandra-env.sh install_location/conf/cassandra-env.sh
cassandra-rackdc.properties /etc/dse/cassandra/cassandra-rackdc.properties install_location/conf/cassandra-rackdc.properties
cassandra-topology.properties /etc/dse/cassandra/cassandra-topology.properties install_location/conf/cassandra-topology.properties
jmxremote.password /etc/cassandra/jmxremote.password install_location/conf/jmxremote.password
Tomcat server configuration file
server.xml /etc/dse/resources/tomcat/conf/server.xml install_location/resources/tomcat/conf/server.xml

DataStax driver changes

DataStax drivers come in two types:

  • DataStax drivers for DataStax Enterprise — for use by DSE 4.8 and later
  • DataStax drivers for Apache Cassandra — for use by Apache Cassandra and DSE 4.7 and earlier
Note: While the DataStax drivers for Apache Cassandra drivers can connect to DSE 5.0 and later clusters, DataStax strongly recommends upgrading to the DSE drivers. The DSE drivers provide functionality for all DataStax Enterprise features.
Attention: TTL expiration timestamps are susceptible to the year 2038 problem. If the TTL value is long and an expiration date that is greater than the maximum threshold of 2038-01-19T03:14:06+00:00, the data is immediately expired and purged on the next compaction. DataStax strongly recommends upgrading to DSE 4.8.16 and taking required action to protect against silent data loss. (DSP-15412).

General recommendations

Be sure to read the DataStax Enterprise 4.8 release notes.

Attention: DataStax recommends upgrading to DSE 4.8.16.
Note: DataStax recommends backing up your data prior to any version upgrade, including logs and custom configurations. A backup provides the ability to revert and restore all the data used in the previous version if necessary.

OpsCenter provides a Backup Service that manages enterprise-wide backup and restore operations for DataStax Enterprise clusters. OpsCenter 6.5 and later is recommended.

General restrictions and limitations during the upgrade process

Restrictions and limitations apply while a cluster is in a partially upgraded state. The cluster continues to work as though it were on the earlier version of DataStax Enterprise until all of the nodes in the cluster are upgraded.

Restrictions for all nodes during an upgrade
  • Do not enable new features.
  • Do not run nodetool repair.
  • Do not bootstrap or decommission nodes.
  • Failure to upgrade SSTables when required results in a significant performance impact and increased disk usage. Upgrading is not complete until the SSTables are upgraded.
Note: Nodes on different versions might show a schema disagreement during an upgrade.
DSE Analytics (Hadoop and Spark) upgrade restrictions
  • Do not run analytics jobs until all nodes are upgraded.
  • Kill all Spark worker processes before you stop the node and install the new version.
DSE Search (Solr) upgrade restrictions and limitations
  • Do not update schemas.
  • Do not reindex DSE Search nodes during upgrade.
  • Do not issue these types of queries during a rolling restart: DDL or TRUNCATE.
Security upgrade restrictions
  • Do not change security credentials or permissions until after the upgrade is complete.
  • If you are not already using Kerberos, do not set up Kerberos authentication before upgrading. First upgrade the cluster, then set up Kerberos.

Preparing to upgrade

  1. Back up your data.

    OpsCenter provides a Backup Service that manages enterprise-wide backup and restore operations for DataStax Enterprise clusters. OpsCenter 6.5 and later is recommended.

  2. Verify your current product version:
    dse -v
  3. Upgrade to the latest patch release on your current version.

    The latest version of DSE 4.8 is 4.8.16.

  4. Before upgrading, be sure that each node has adequate free disk space.

    The required space depends on the compaction strategy. See Disk space.

  5. Familiarize yourself with the changes and features in DataStax Enterprise and Apache Cassandra:
    • DataStax Enterprise release notes for the upgrade version and complete all required actions.

      DSE release notes include required planning, components, changes and enhancements, known issues, and resolved issues. See 5.1, 5.0, and 4.8.

    • General upgrading advice for any version and New features for Apache Cassandra in NEWS.txt. Be sure to read the NEWS.txt all the way back to your current version.
    • Apache Cassandra changes in CHANGES.txt.
    • DataStax Enterprise production-certified changes to Apache Cassandra in the DSE release notes.
    • DataStax driver changes.
  6. DSE Search nodes:
    • Tune the schema before you upgrade.
    • All unique key elements must be indexed in the Solr schema. To verify unique key elements, review schema.xml to ensure that all unique key fields must have indexed=true.

    • If you changed the schema, do a full reindex.
  7. Back up the configuration files you use to a folder that is not in the directory where you normally run commands.

    The configuration files are overwritten with default values during installation of the new version.

Upgrade steps

Tip: The DataStax installer automatically performs many upgrade tasks.
  1. Run nodetool repair to ensure that data on each replica is consistent with data on other nodes.
  2. Upgrade order matters. Upgrade nodes in this order:
    • In multiple datacenter clusters, upgrade every node in one datacenter before upgrading another datacenter.
    • Upgrade the seed nodes within a datacenter first.

      For DSE Analytics nodes using DSE Hadoop, upgrade the Job Tracker node first. Then upgrade Hadoop nodes, followed by Spark nodes.

    • Upgrade nodes in this order:
      1. DSE Analytics datacenters
      2. Transactional/DSE Graph datacenters
      3. DSE Search datacenters
    With a few exceptions, the cluster continues to work as though it were on the earlier version of DataStax Enterprise until all of the nodes in the cluster are upgraded. Upgrade and restart the nodes one at a time. Other nodes in the cluster continue to operate at the earlier version until all nodes are upgraded.
  3. Run nodetool drain to flush the commit log of the old installation:
    nodetool drain -h hostname

    This step saves time when nodes start up after the upgrade, and prevents DSE Search nodes from having to reindex data.

  4. Stop the node.
  5. Use the appropriate method to install the new product version.
  6. To configure the new product version:
    1. Compare your backup configuration files to the new configuration files:
    2. Merge the applicable modifications into the new version.
  7. Start the node.
  8. Verify that the upgraded datacenter names match the datacenter names in the keyspace schema definition:
    nodetool status
  9. Review the logs for warnings, errors, and exceptions.

    Warnings, errors, and exceptions are frequently found in the logs when starting an upgraded node. Some of these log entries are informational to help you execute specific upgrade-related steps. If you find unexpected warnings, errors, or exceptions, contact DataStax Support.

  10. Repeat the upgrade and restart on each node in the cluster following the recommended upgrade order.

    Upgrading and restarting each node is called a rolling restart.

  11. After the new version is installed on each node, DataStax recommends upgrading the SSTables on each node.

    Upgrading SSTables is recommended for optimal performance, but is not required for patch releases.

    nodetool upgradesstables

    If the SSTables are already on the current version, the command returns immediately and no action is taken.

    Use the --jobs option to set the number of SSTables that upgrade simultaneously. The default setting is 2, which minimizes impact on the cluster. Set to 0 to use all available compaction threads. For information about nodetool upgradesstables, including how to speed it up, see the DataStax Support KB article Nodetool upgradesstables FAQ.

  12. If you use the OpsCenter Repair Service, turn on the Repair Service.