cassandra.policies - Load balancing and Failure Handling Policies

Load Balancing

class HostDistance

A measure of how “distant” a node is from the client, which may influence how the load balancer distributes requests and how many connections are opened to the node.

Attributes

IGNORED
= -1

A node with this distance should never be queried or have connections opened to it.

LOCAL
= 0

Nodes with LOCAL distance will be preferred for operations under some load balancing policies (such as DCAwareRoundRobinPolicy) and will have a greater number of connections opened against them by default.

This distance is typically used for nodes within the same datacenter as the client.

REMOTE
= 1

Nodes with REMOTE distance will be treated as a last resort by some load balancing policies (such as DCAwareRoundRobinPolicy) and will have a smaller number of connections opened against them by default.

This distance is typically used for nodes outside of the datacenter that the client is running in.

class LoadBalancingPolicy

Load balancing policies are used to decide how to distribute requests among all possible coordinator nodes in the cluster.

In particular, they may focus on querying “near” nodes (those in a local datacenter) or on querying nodes who happen to be replicas for the requested data.

You may also use subclasses of LoadBalancingPolicy for custom behavior.

Methods

distance
(host)

Returns a measure of how remote a Host is in terms of the HostDistance enums.

populate
(cluster, hosts)

This method is called to initialize the load balancing policy with a set of Host instances before its first use. The cluster parameter is an instance of Cluster.

make_query_plan
(working_keyspace=None, query=None)

Given a Statement instance, return a iterable of Host instances which should be queried in that order. A generator may work well for custom implementations of this method.

Note that the query argument may be None when preparing statements.

working_keyspace should be the string name of the current keyspace, as set through Session.set_keyspace() or with a USE statement.

check_supported
()

This will be called after the cluster Metadata has been initialized. If the load balancing policy implementation cannot be supported for some reason (such as a missing C extension), this is the point at which it should raise an exception.

class RoundRobinPolicy

A subclass of LoadBalancingPolicy which evenly distributes queries across all nodes in the cluster, regardless of what datacenter the nodes may be in.

This load balancing policy is used by default.

Methods

populate
(cluster, hosts)

This method is called to initialize the load balancing policy with a set of Host instances before its first use. The cluster parameter is an instance of Cluster.

distance
(host)

Returns a measure of how remote a Host is in terms of the HostDistance enums.

make_query_plan
(working_keyspace=None, query=None)

Given a Statement instance, return a iterable of Host instances which should be queried in that order. A generator may work well for custom implementations of this method.

Note that the query argument may be None when preparing statements.

working_keyspace should be the string name of the current keyspace, as set through Session.set_keyspace() or with a USE statement.

on_up
(host)

Called when a node is marked up.

on_down
(host)

Called when a node is marked down.

on_add
(host)

Called when a node is added to the cluster. The newly added node should be considered up.

on_remove
(host)

Called when a node is removed from the cluster.

class DCAwareRoundRobinPolicy

Similar to RoundRobinPolicy, but prefers hosts in the local datacenter and only uses nodes in remote datacenters as a last resort.

The local_dc parameter should be the name of the datacenter (such as is reported by nodetool ring) that should be considered local. If not specified, the driver will choose a local_dc based on the first host among Cluster.contact_points having a valid DC. If relying on this mechanism, all specified contact points should be nodes in a single, local DC.

used_hosts_per_remote_dc controls how many nodes in each remote datacenter will have connections opened against them. In other words, used_hosts_per_remote_dc hosts will be considered REMOTE and the rest will be considered IGNORED. By default, all remote hosts are ignored.

Methods

populate
(cluster, hosts)

This method is called to initialize the load balancing policy with a set of Host instances before its first use. The cluster parameter is an instance of Cluster.

distance
(host)

Returns a measure of how remote a Host is in terms of the HostDistance enums.

make_query_plan
(working_keyspace=None, query=None)

Given a Statement instance, return a iterable of Host instances which should be queried in that order. A generator may work well for custom implementations of this method.

Note that the query argument may be None when preparing statements.

working_keyspace should be the string name of the current keyspace, as set through Session.set_keyspace() or with a USE statement.

on_up
(host)

Called when a node is marked up.

on_down
(host)

Called when a node is marked down.

on_add
(host)

Called when a node is added to the cluster. The newly added node should be considered up.

on_remove
(host)

Called when a node is removed from the cluster.

class WhiteListRoundRobinPolicy

A subclass of RoundRobinPolicy which evenly distributes queries across all nodes in the cluster, regardless of what datacenter the nodes may be in, but only if that node exists in the list of allowed nodes

This policy is addresses the issue described in https://datastax-oss.atlassian.net/browse/JAVA-145 Where connection errors occur when connection attempts are made to private IP addresses remotely

The hosts parameter should be a sequence of hosts to permit connections to.

Methods

populate
(cluster, hosts)

This method is called to initialize the load balancing policy with a set of Host instances before its first use. The cluster parameter is an instance of Cluster.

distance
(host)

Returns a measure of how remote a Host is in terms of the HostDistance enums.

on_up
(host)

Called when a node is marked up.

on_add
(host)

Called when a node is added to the cluster. The newly added node should be considered up.

class TokenAwarePolicy

A LoadBalancingPolicy wrapper that adds token awareness to a child policy.

This alters the child policy’s behavior so that it first attempts to send queries to LOCAL replicas (as determined by the child policy) based on the Statement’s routing_key. If shuffle_replicas is truthy, these replicas will be yielded in a random order. Once those hosts are exhausted, the remaining hosts in the child policy’s query plan will be used in the order provided by the child policy.

If no routing_key is set on the query, the child policy’s query plan will be used as is.

Attributes

shuffle_replicas
= False

Yield local replicas in a random order.

Methods

populate
(cluster, hosts)

This method is called to initialize the load balancing policy with a set of Host instances before its first use. The cluster parameter is an instance of Cluster.

check_supported
()

This will be called after the cluster Metadata has been initialized. If the load balancing policy implementation cannot be supported for some reason (such as a missing C extension), this is the point at which it should raise an exception.

distance
(*args, **kwargs)

Returns a measure of how remote a Host is in terms of the HostDistance enums.

make_query_plan
(working_keyspace=None, query=None)

Given a Statement instance, return a iterable of Host instances which should be queried in that order. A generator may work well for custom implementations of this method.

Note that the query argument may be None when preparing statements.

working_keyspace should be the string name of the current keyspace, as set through Session.set_keyspace() or with a USE statement.

on_up
(*args, **kwargs)

Called when a node is marked up.

on_down
(*args, **kwargs)

Called when a node is marked down.

on_add
(*args, **kwargs)

Called when a node is added to the cluster. The newly added node should be considered up.

on_remove
(*args, **kwargs)

Called when a node is removed from the cluster.

class HostFilterPolicy

A LoadBalancingPolicy subclass configured with a child policy, and a single-argument predicate. This policy defers to the child policy for hosts where predicate(host) is truthy. Hosts for which predicate(host) is falsey will be considered IGNORED, and will not be used in a query plan.

This can be used in the cases where you need a whitelist or blacklist policy, e.g. to prepare for decommissioning nodes or for testing:

def address_is_ignored(host):
    return host.address in [ignored_address0, ignored_address1]

blacklist_filter_policy = HostFilterPolicy(
    child_policy=RoundRobinPolicy(),
    predicate=address_is_ignored
)

cluster = Cluster(
    primary_host,
    load_balancing_policy=blacklist_filter_policy,
)

See the note in the make_query_plan() documentation for a caveat on how wrapping ordering polices (e.g. RoundRobinPolicy) may break desirable properties of the wrapped policy.

Please note that whitelist and blacklist policies are not recommended for general, day-to-day use. You probably want something like DCAwareRoundRobinPolicy, which prefers a local DC but has fallbacks, over a brute-force method like whitelisting or blacklisting.

Parameters

  • child_policy – an instantiated LoadBalancingPolicy that this one will defer to.

  • predicate – a one-parameter function that takes a Host. If it returns a falsey value, the Host will be IGNORED and not returned in query plans.

we document these methods manually so we can specify a param to predicate

Methods

predicate
(host)

A predicate, set on object initialization, that takes a Host and returns a value. If the value is falsy, the Host is IGNORED. If the value is truthy, HostFilterPolicy defers to the child policy to determine the host’s distance.

This is a read-only value set in __init__, implemented as a property.

distance
(host)

Checks if predicate(host), then returns IGNORED if falsey, and defers to the child policy otherwise.

make_query_plan
(working_keyspace=None, query=None)

Defers to the child policy’s LoadBalancingPolicy.make_query_plan() and filters the results.

Note that this filtering may break desirable properties of the wrapped policy in some cases. For instance, imagine if you configure this policy to filter out host2, and to wrap a round-robin policy that rotates through three hosts in the order host1, host2, host3, host2, host3, host1, host3, host1, host2, repeating. This policy will yield host1, host3, host3, host1, host3, host1, disproportionately favoring host3.

Translating Server Node Addresses

class AddressTranslator

Interface for translating cluster-defined endpoints.

The driver discovers nodes using server metadata and topology change events. Normally, the endpoint defined by the server is the right way to connect to a node. In some environments, these addresses may not be reachable, or not preferred (public vs. private IPs in cloud environments, suboptimal routing, etc). This interface allows for translating from server defined endpoints to preferred addresses for driver connections.

Note: contact_points provided while creating the Cluster instance are not translated using this mechanism – only addresses received from Cassandra nodes are.

Methods

translate
(addr)

Accepts the node ip address, and returns a translated address to be used connecting to this node.

class IdentityTranslator

Returns the endpoint with no translation

Methods

translate
(addr)

Accepts the node ip address, and returns a translated address to be used connecting to this node.

class EC2MultiRegionTranslator

Resolves private ips of the hosts in the same datacenter as the client, and public ips of hosts in other datacenters.

Methods

translate
(addr)

Reverse DNS the public broadcast_address, then lookup that hostname to get the AWS-resolved IP, which will point to the private IP address within the same datacenter.

Marking Hosts Up or Down

class ConvictionPolicy

A policy which decides when hosts should be considered down based on the types of failures and the number of failures.

If custom behavior is needed, this class may be subclassed.

host is an instance of Host.

Methods

add_failure
(connection_exc)

Implementations should return True if the host should be convicted, False otherwise.

reset
()

Implementations should clear out any convictions or state regarding the host.

class SimpleConvictionPolicy

The default implementation of ConvictionPolicy, which simply marks a host as down after the first failure of any kind.

host is an instance of Host.

Methods

add_failure
(connection_exc)

Implementations should return True if the host should be convicted, False otherwise.

reset
()

Implementations should clear out any convictions or state regarding the host.

Reconnecting to Dead Hosts

class ReconnectionPolicy

This class and its subclasses govern how frequently an attempt is made to reconnect to nodes that are marked as dead.

If custom behavior is needed, this class may be subclassed.

Methods

new_schedule
()

This should return a finite or infinite iterable of delays (each as a floating point number of seconds) inbetween each failed reconnection attempt. Note that if the iterable is finite, reconnection attempts will cease once the iterable is exhausted.

class ConstantReconnectionPolicy

A ReconnectionPolicy subclass which sleeps for a fixed delay inbetween each reconnection attempt.

delay should be a floating point number of seconds to wait inbetween each attempt.

max_attempts should be a total number of attempts to be made before giving up, or None to continue reconnection attempts forever. The default is 64.

Methods

new_schedule
()

This should return a finite or infinite iterable of delays (each as a floating point number of seconds) inbetween each failed reconnection attempt. Note that if the iterable is finite, reconnection attempts will cease once the iterable is exhausted.

class ExponentialReconnectionPolicy

A ReconnectionPolicy subclass which exponentially increases the length of the delay inbetween each reconnection attempt up to a set maximum delay.

base_delay and max_delay should be in floating point units of seconds.

max_attempts should be a total number of attempts to be made before giving up, or None to continue reconnection attempts forever. The default is 64.

Methods

new_schedule
()

This should return a finite or infinite iterable of delays (each as a floating point number of seconds) inbetween each failed reconnection attempt. Note that if the iterable is finite, reconnection attempts will cease once the iterable is exhausted.

Retrying Failed Operations

class WriteType

For usage with RetryPolicy, this describe a type of write operation.

Attributes

SIMPLE
= 0

A write to a single partition key. Such writes are guaranteed to be atomic and isolated.

BATCH
= 1

A write to multiple partition keys that used the distributed batch log to ensure atomicity.

UNLOGGED_BATCH
= 2

A write to multiple partition keys that did not use the distributed batch log. Atomicity for such writes is not guaranteed.

COUNTER
= 3

A counter write (for one or multiple partition keys). Such writes should not be replayed in order to avoid overcount.

BATCH_LOG
= 4

The initial write to the distributed batch log that Cassandra performs internally before a BATCH write.

CAS
= 5

A lighweight-transaction write, such as “DELETE … IF EXISTS”.

VIEW
= 6

This WriteType is only seen in results for requests that were unable to complete MV operations.

CDC
= 7

This WriteType is only seen in results for requests that were unable to complete CDC operations.

class RetryPolicy

A policy that describes whether to retry, rethrow, or ignore coordinator timeout and unavailable failures. These are failures reported from the server side. Timeouts are configured by settings in cassandra.yaml. Unavailable failures occur when the coordinator cannot acheive the consistency level for a request. For further information see the method descriptions below.

To specify a default retry policy, set the Cluster.default_retry_policy attribute to an instance of this class or one of its subclasses.

To specify a retry policy per query, set the Statement.retry_policy attribute to an instance of this class or one of its subclasses.

If custom behavior is needed for retrying certain operations, this class may be subclassed.

Attributes

RETRY
= 0

This should be returned from the below methods if the operation should be retried on the same connection.

RETHROW
= 1

This should be returned from the below methods if the failure should be propagated and no more retries attempted.

IGNORE
= 2

This should be returned from the below methods if the failure should be ignored but no more retries should be attempted.

RETRY_NEXT_HOST
= 3

This should be returned from the below methods if the operation should be retried on another connection.

Methods

on_read_timeout
(query, consistency, required_responses, received_responses, data_retrieved, retry_num)

This is called when a read operation times out from the coordinator’s perspective (i.e. a replica did not respond to the coordinator in time). It should return a tuple with two items: one of the class enums (such as RETRY) and a ConsistencyLevel to retry the operation at or None to keep the same consistency level.

query is the Statement that timed out.

consistency is the ConsistencyLevel that the operation was attempted at.

The required_responses and received_responses parameters describe how many replicas needed to respond to meet the requested consistency level and how many actually did respond before the coordinator timed out the request. data_retrieved is a boolean indicating whether any of those responses contained data (as opposed to just a digest).

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, operations will be retried at most once, and only if a sufficient number of replicas responded (with data digests).

on_write_timeout
(query, consistency, write_type, required_responses, received_responses, retry_num)

This is called when a write operation times out from the coordinator’s perspective (i.e. a replica did not respond to the coordinator in time).

query is the Statement that timed out.

consistency is the ConsistencyLevel that the operation was attempted at.

write_type is one of the WriteType enums describing the type of write operation.

The required_responses and received_responses parameters describe how many replicas needed to acknowledge the write to meet the requested consistency level and how many replicas actually did acknowledge the write before the coordinator timed out the request.

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, failed write operations will retried at most once, and they will only be retried if the write_type was BATCH_LOG.

on_unavailable
(query, consistency, required_replicas, alive_replicas, retry_num)

This is called when the coordinator node determines that a read or write operation cannot be successful because the number of live replicas are too low to meet the requested ConsistencyLevel. This means that the read or write operation was never forwarded to any replicas.

query is the Statement that failed.

consistency is the ConsistencyLevel that the operation was attempted at.

required_replicas is the number of replicas that would have needed to acknowledge the operation to meet the requested consistency level. alive_replicas is the number of replicas that the coordinator considered alive at the time of the request.

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, if this is the first retry, it triggers a retry on the next host in the query plan with the same consistency level. If this is not the first retry, no retries will be attempted and the error will be re-raised.

class FallthroughRetryPolicy

A retry policy that never retries and always propagates failures to the application.

Methods

on_read_timeout
(*args, **kwargs)

This is called when a read operation times out from the coordinator’s perspective (i.e. a replica did not respond to the coordinator in time). It should return a tuple with two items: one of the class enums (such as RETRY) and a ConsistencyLevel to retry the operation at or None to keep the same consistency level.

query is the Statement that timed out.

consistency is the ConsistencyLevel that the operation was attempted at.

The required_responses and received_responses parameters describe how many replicas needed to respond to meet the requested consistency level and how many actually did respond before the coordinator timed out the request. data_retrieved is a boolean indicating whether any of those responses contained data (as opposed to just a digest).

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, operations will be retried at most once, and only if a sufficient number of replicas responded (with data digests).

on_write_timeout
(*args, **kwargs)

This is called when a write operation times out from the coordinator’s perspective (i.e. a replica did not respond to the coordinator in time).

query is the Statement that timed out.

consistency is the ConsistencyLevel that the operation was attempted at.

write_type is one of the WriteType enums describing the type of write operation.

The required_responses and received_responses parameters describe how many replicas needed to acknowledge the write to meet the requested consistency level and how many replicas actually did acknowledge the write before the coordinator timed out the request.

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, failed write operations will retried at most once, and they will only be retried if the write_type was BATCH_LOG.

on_unavailable
(*args, **kwargs)

This is called when the coordinator node determines that a read or write operation cannot be successful because the number of live replicas are too low to meet the requested ConsistencyLevel. This means that the read or write operation was never forwarded to any replicas.

query is the Statement that failed.

consistency is the ConsistencyLevel that the operation was attempted at.

required_replicas is the number of replicas that would have needed to acknowledge the operation to meet the requested consistency level. alive_replicas is the number of replicas that the coordinator considered alive at the time of the request.

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, if this is the first retry, it triggers a retry on the next host in the query plan with the same consistency level. If this is not the first retry, no retries will be attempted and the error will be re-raised.

class DowngradingConsistencyRetryPolicy

Deprecated: This retry policy will be removed in the next major release.

A retry policy that sometimes retries with a lower consistency level than the one initially requested.

BEWARE: This policy may retry queries using a lower consistency level than the one initially requested. By doing so, it may break consistency guarantees. In other words, if you use this retry policy, there are cases (documented below) where a read at QUORUM may not see a preceding write at QUORUM. Do not use this policy unless you have understood the cases where this can happen and are ok with that. It is also recommended to subclass this class so that queries that required a consistency level downgrade can be recorded (so that repairs can be made later, etc).

This policy implements the same retries as RetryPolicy, but on top of that, it also retries in the following cases:

  • On a read timeout: if the number of replicas that responded is greater than one but lower than is required by the requested consistency level, the operation is retried at a lower consistency level.

  • On a write timeout: if the operation is an UNLOGGED_BATCH and at least one replica acknowledged the write, the operation is retried at a lower consistency level. Furthermore, for other write types, if at least one replica acknowledged the write, the timeout is ignored.

  • On an unavailable exception: if at least one replica is alive, the operation is retried at a lower consistency level.

The reasoning behind this retry policy is as follows: if, based on the information the Cassandra coordinator node returns, retrying the operation with the initially requested consistency has a chance to succeed, do it. Otherwise, if based on that information we know the initially requested consistency level cannot be achieved currently, then:

  • For writes, ignore the exception (thus silently failing the consistency requirement) if we know the write has been persisted on at least one replica.

  • For reads, try reading at a lower consistency level (thus silently failing the consistency requirement).

In other words, this policy implements the idea that if the requested consistency level cannot be achieved, the next best thing for writes is to make sure the data is persisted, and that reading something is better than reading nothing, even if there is a risk of reading stale data.

Methods

on_read_timeout
(query, consistency, required_responses, received_responses, data_retrieved, retry_num)

This is called when a read operation times out from the coordinator’s perspective (i.e. a replica did not respond to the coordinator in time). It should return a tuple with two items: one of the class enums (such as RETRY) and a ConsistencyLevel to retry the operation at or None to keep the same consistency level.

query is the Statement that timed out.

consistency is the ConsistencyLevel that the operation was attempted at.

The required_responses and received_responses parameters describe how many replicas needed to respond to meet the requested consistency level and how many actually did respond before the coordinator timed out the request. data_retrieved is a boolean indicating whether any of those responses contained data (as opposed to just a digest).

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, operations will be retried at most once, and only if a sufficient number of replicas responded (with data digests).

on_write_timeout
(query, consistency, write_type, required_responses, received_responses, retry_num)

This is called when a write operation times out from the coordinator’s perspective (i.e. a replica did not respond to the coordinator in time).

query is the Statement that timed out.

consistency is the ConsistencyLevel that the operation was attempted at.

write_type is one of the WriteType enums describing the type of write operation.

The required_responses and received_responses parameters describe how many replicas needed to acknowledge the write to meet the requested consistency level and how many replicas actually did acknowledge the write before the coordinator timed out the request.

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, failed write operations will retried at most once, and they will only be retried if the write_type was BATCH_LOG.

on_unavailable
(query, consistency, required_replicas, alive_replicas, retry_num)

This is called when the coordinator node determines that a read or write operation cannot be successful because the number of live replicas are too low to meet the requested ConsistencyLevel. This means that the read or write operation was never forwarded to any replicas.

query is the Statement that failed.

consistency is the ConsistencyLevel that the operation was attempted at.

required_replicas is the number of replicas that would have needed to acknowledge the operation to meet the requested consistency level. alive_replicas is the number of replicas that the coordinator considered alive at the time of the request.

retry_num counts how many times the operation has been retried, so the first time this method is called, retry_num will be 0.

By default, if this is the first retry, it triggers a retry on the next host in the query plan with the same consistency level. If this is not the first retry, no retries will be attempted and the error will be re-raised.

Retrying Idempotent Operations

class SpeculativeExecutionPolicy

Interface for specifying speculative execution plans

Methods

new_plan
(keyspace, statement)

Returns

Parameters

  • keyspace –

  • statement –

Returns

class ConstantSpeculativeExecutionPolicy

A speculative execution policy that sends a new query every X seconds (delay) for a maximum of Y attempts (max_attempts).

Methods

new_plan
(keyspace, statement)

Returns

Parameters

  • keyspace –

  • statement –

Returns