Configuring LDAP

Configure LDAP (Lightweight Directory Access Protocol) for authorizing users to access OpsCenter.

1. Open the opscenterd.conf file for editing.
2. Add an [authentication] section with the following options:

   Option	Description
   passwd_db	Contains the required OpsCenter user role information.
   enabled	Set to True to enable LDAP authentication.
   authentication_method	Set to LDAP, regardless if configuring Active Directory.

   [authentication] 
   passwd_db = ./passwd.db
   enabled = True
   authentication_method = LDAP

3. Set the configuration for your LDAP server. Add an [ldap] section to opscenterd.conf with the following LDAP server options as appropriate for your LDAP implementation.

   Expand the following table to view the available options. Additionally, see the example configurations to understand an SSL LDAP configuration versus an Active Directory configuration.

   LDAP server options

   Option	Description
   server_host	The host name of the LDAP server.
   server_port	The port on which the LDAP server listens. For example, 389 or 636. 389 is the default port for non-SSL LDAP and AD. 636 is the default port for SSL LDAP and AD. For more information about ports, see OpsCenter ports.
   hostname_verification	Sets whether hostname verification should happen for SSL/TLS connections. hostname_verification = True
   uri_scheme	In LDAPv2 environments, TLS is normally started using the LDAP Secure URI scheme instead of the normal LDAP URI scheme. OpenLDAP command line tools allow either scheme to be used with the -H flag and with the URI ldap.conf(5) option. Defaults to ldap for ldap_security = None; defaults to ldaps for ldap_security = SSL or TLS.
   search_dn	The username of the user that is used to search for other users on the LDAP server. When a user attempts to authenticate with LDAP, OpsCenter searches for the user in LDAP to discover whether the user exists and which roles the user is associated with. The only permission that the search user needs to have in the LDAP system is the ability to perform LDAP searches. Note: If the search_dn and search_password (that constitute the search user entry point for locating users in LDAP) are omitted from the configuration, LDAP attempts to make an anonymous bind to perform the user search.
   search_password	The password of the search_dn user.
   user_search_base	The search base for your domain, used to look up users. Set the ou and dc elements for your LDAP domain. For example, this can be set to ou=users,dc=domain,dc=top level domain. More specifically:ou=users,dc=example,dc=com. Active Directory uses a different user search base. For example: CN=search,CN=Users,DC=Active Directory domain name,DC=internal. More specifically:CN=search,CN=Users,DC=example-sales,DC=internal.
   user_search_filter	The LDAP search filter used to uniquely identify a user. The default setting is (uid={0}), which looks for a user by unique user identifier. The value of the {0} variable is the username provided when logging in to OpsCenter. When using Active Directory, set the filter to (sAMAccountName={0}). Note: There is a known limitation in OpsCenter when using search filters for Active Directory. See troubleshooting LDAP.
   group_search_base	The LDAP search base used to find a group. Example: ou=groups,dc=qaldap,dc=datastax,dc=lan
   group_search_filter	Deprecated. The LDAP search filter used to find a user's group. Example: (member=cn={0},ou=users,dc=nodomain). Within the group_search_base, filter for members based on cn. For existing Active Directory implementations that have this configuration option already set, the group_search_filter_with_dn overwrites the returned value with the user's DN.
   group_search_filter_with_dn	The LDAP search filter used to find a user's group. Uses the full user's DN from a user search. Overrides the deprecated group_search_filter. Example: (member={0}).
   group_name_attribute	The LDAP field name used to identify a group's name. For example: cn.
   admin_group_name	The name of the admin group or a comma-separated list of admin group names; for example: admin, superusers. OpsCenter automatically creates the roles with admin permissions for the roles provided in the admin_group_name list. Escape any restricted LDAP characters. If your group name contains restricted LDAP characters such as "," a comma, you must escape them. For example, two admin groups "foo , bar" and "baz" should be entered as: foo \, bar, baz
   user_memberof_attribute	Set to the attribute on the user entry containing group membership information. Set this option when using a memberof_search for the group_search_type. OpsCenter allows for an alternate method of determining a user's role. When using memberof_search, rather than doing a directory search in LDAP for any roles that match the user, only the user is inspected. You can specify which attribute for a user is inspected. For example, you can define a user with a new attribute such as opscenter_role and populate it with the user's role in OpsCenter. Specify the value of the new attribute so that OpsCenter can inspect the user attribute.
   group_search_type	Defines how group membership is determined for a user. Available options: directory_search: (Default) Performs a subtree search of group_search_base using group_search_filter to filter the results. memberof_search: gets groups from the user_memberof_attribute of a user. Using this option requires the directory server to have memberof support. When using the memberof_search rather than directory_search for group searches, you do not need to specify the group_search_base or group_search_filter options.
   user_memberof_stores_dn	Set to True if the memberof attribute's value is distinguished names of groups. This option must be set to True when configuring Active Directory, OpenLDAP, or when any other LDAP implementation returns a DN for the memberOf attribute value. Note: If using an Oracle LDAP implementation, this option should be set to True if user_memberof_attribute is set to isMemberOf. Default: False. Set user_memberof_stores_dn to False if the attribute specified by user_memberof_attribute denotes 0 or more group names that correspond to the roles in OpsCenter. For example, if the user_memberof_attribute is set to employeeType, set the user_memberof_stores_dn option to False because the employeeType attribute value is not a distinguished name. Tip: If the user_memberof_attribute_stores_dn is False and log in fails, and OpsCenter suspects the group name might be a DN, a warning is logged: [opscenterd] WARN: It looks like you might be using Active Directory for authentication. You may need to set the 'user_memberof_attribute_stores_dn' config value to True and set the group_name_attribute config value appropriately in opscenterd.conf.
   ldap_security	The type of security to use with LDAP: None, TLS, or SSL. When set to TLS, uses TLS start. Setting this option to TLS or SSL sets the uri_scheme to LDAPS. Setting this option to None sets the uri_scheme to LDAP.
   truststore	Path to the truststore for SSL certificates.
   truststore_type	Type of the truststore. Default: JKS (Java Keystore).
   truststore_pass	The password to access the truststore.
   enforce_single_user_search_result	Returns an error when multiple entries are returned from a user search after all applicable referrals are followed. Set to False if the user_search_base is not confined to one Organizational Unit (OU). Default: True.
   connection_timeout	The number of seconds to wait before concluding that the LDAP server is down. Default: 20 seconds.

4. Restart OpsCenter for the changes to take effect.

01  [authentication] 
02   passwd_db = ./passwd.db
03   enabled = True
04   authentication_method = LDAP
05
06   [ldap] 
07   server_host = ldap.myCompany.lan
08   server_port = 636
09   hostname_verification = true
10   uri_scheme = ldaps
11   search_dn = cn=admin,dc=devldap,dc=datastax,dc=lan 
12   search_password = ****
13   user_search_base = ou=users,dc=devldap,dc=datastax,dc=lan
14   user_search_filter = (uid={0})
15   #user_search_base = CN=search,CN=Users,DC=datastax,DC=internal # AD base
16   #user_search_filter = (sAMAccountName={0}) # AD filter
17   group_search_base = ou=users,dc=devldap,dc=datastax,dc=lan
18   group_search_filter_with_dn = (member={0})
19   group_name_attribute = cn
20   group_search_type = directory_search 
21   admin_group_name = superusers,superusers2
22   ldap_security = SSL_TLS
23   truststore_type = JKS
24   truststore = ./truststore.jks 
25   truststore_pass = secret
  

01  [authentication] 
02   passwd_db = ./passwd.db
03   enabled = True
04   authentication_method = LDAP
05
06  [ldap]
07  server_host = mywin2008.myCompany.lan
08  server_port = 636
09  hostname_verification = true
10  uri_scheme = ldap
11  search_dn = CN=Administrator,CN=Users,DC=prodwin2008,DC=datastax,DC=lan
12  search_password = ****
13  user_search_base = CN=Users,DC=prodwin2008,DC=datastax,DC=lan # AD base
14  user_search_filter = (sAMAccountName={0}) # AD filter
15  admin_group_name = superusers
16  group_search_type = memberof_search
17  group_name_attribute = cn
18  user_memberof_attribute = memberof
19  user_memberof_stores_dn = True
20  ldap_security = SSL_TLS
21  truststore_type = JKS
22  truststore = /tmp/path_to_truststore_win2008
23  truststore_pass = secret