Configuring LDAP 

Configure LDAP (Lightweight Directory Access Protocol) for authorizing users to access OpsCenter.

Configure LDAP (Lightweight Directory Access Protocol) for users accessing OpsCenter.

LDAP configuration is extremely flexible with many configuration options possible within OpsCenter. To peruse all of the available [ldap] configuration options, see OpsCenter configuration properties. This procedure provides a basic configuration example based on searching for a user in both user and group categories to authenticate a user.


There must be a properly configured LDAP v3 server running. The supported LDAP servers are:
  • Microsoft Active Directory:
    • Windows 2008
    • Windows 2012
  • OpenLDAP 2.4.x
  • Oracle Directory Server Enterprise Edition

Additional requirements:

  • If your organization started with standard OpsCenter authentication and subsequently switched to implementing LDAP, delete the old passwd.db.
  • Roles: If there are LDAP roles, create and mirror in OpsCenter the user role names and permissions that are in LDAP. Role permissions are stored in OpsCenter, not LDAP. Users must have at least one role to be able to log in to OpsCenter when LDAP is enabled.
    Note: Users can only have one role in OpsCenter, regardless of whether they have multiple roles in LDAP. If OpsCenter roles match multiple user roles from the group_search_filter_with_dn filter, an authentication failure results because OpsCenter cannot determine which role to grant the user. See troubleshooting LDAP.


The location of the opscenterd.conf file depends on the type of installation:

  • Package installations: /etc/opscenter/opscenterd.conf
  • Tarball installations: install_location/conf/opscenterd.conf


The default location of the password database passwd.db for OpsCenter authentication depends on the type of installation:

  • Package installations: /etc/opscenter/passwd.db
  • Tarball installations: install_location/passwd.db


  1. Open the opscenterd.conf file for editing.
  2. Add an [authentication] section with the following options:
    Option Description
    passwd_db ./ passwd.db (provide only because it contains the required OpsCenter user role information)
    enabled Set to True to enable LDAP authentication.
    authentication_method Set to LDAP, regardless if configuring Active Directory.
    passwd_db = ./passwd.db
    enabled = True
    authentication_method = LDAP
  3. Set the configuration for your LDAP server. Add an [ldap] section to opscenterd.conf with the following LDAP server options as appropriate for your LDAP implementation:
    Option Description
    server_host The host name of the LDAP server.
    server_port The port on which the LDAP server listens. For example, 389 or 636. 389 is the default port for non-SSL LDAP and AD. 636 is the default port for SSL LDAP and AD. For more information about ports, see OpsCenter ports.
    uri_scheme In LDAPv2 environments, TLS is normally started using the LDAP Secure URI scheme instead of the normal LDAP URI scheme. OpenLDAP command line tools allow either scheme to used with the -H flag and with the URI ldap.conf(5) option. Defaults to ldap for ldap_security = None; defaults to ldaps for ldap_security = SSL or TLS.
    search_dn The username of the user that is used to search for other users on the LDAP server. When a user attempts to authenticate with LDAP, OpsCenter searches for the user in LDAP to discover whether the user exists and which roles the user is associated with. The only permission that the search user needs to have in the LDAP system is the ability to perform LDAP searches.
    Note: If the search_dn and search_password (that constitute the search user entry point for locating users in LDAP) are omitted from the configuration, LDAP attempts to make an anonymous bind to perform the user search.
    search_password The password of the search_dn user.
    user_search_base The search base for your domain, used to look up users. Set the ou and dc elements for your LDAP domain. For example, this can be set to ou=users,dc=domain,dc=top level domain. More specifically:ou=users,dc=example,dc=com.

    Active Directory uses a different user search base. For example: CN=search,CN=Users,DC=Active Directory domain name,DC=internal. More specifically:CN=search,CN=Users,DC=example-sales,DC=internal.

    user_search_filter The LDAP search filter used to uniquely identify a user. The default setting is (uid={0}), which looks for a user by unique user identifier. The value of the {0} variable is the username provided when logging in to OpsCenter.

    When using Active Directory, set the filter to (sAMAccountName={0}).

    Note: There is a known limitation in OpsCenter when using search filters for Active Directory. See troubleshooting LDAP.
    group_search_base The ldap search base used to find a group. Example: ou=groups,dc=qaldap,dc=datastax,dc=lan
    group_search_filter Deprecated. The ldap search filter used to find a user's group. Example: (member=cn={0},ou=users,dc=nodomain). Within the group_search_base, filter for members based on cn. For existing AD implementations that have this configuration option already set, the group_search_filter_with_dn overwrites the returned value with the user's DN.
    group_search_filter_with_dn The ldap search filter used to find a user's group. Uses the full user's DN from a user search. Overrides the deprecated group_search_filter. Example: (member={0}).
    group_name_attribute The ldap field name used to identify a group's name. For example: cn.
    admin_group_name The name of the admin group or a comma-separated list of admin group names; for example: admin, superusers. OpsCenter automatically creates the roles with admin permissions for the roles provided in the admin_group_name list. Escape any restricted LDAP characters. If your group name contains restricted LDAP characters such as "," a comma, you must escape them. For example, two admin groups "foo , bar" and "baz" should be entered as: foo \, bar, baz
    user_memberof_attribute Set to the attribute on the user entry containing group membership information. Set this option when using a memberof_search for the group_search_type.

    OpsCenter allows for an alternate method of determining a user's role. When using memberof_search, rather than doing a directory search in LDAP for any roles that match the user, only the user is inspected. You can specify which attribute for a user is inspected. For example, you can define a user with a new attribute such as opscenter_role and populate it with the user's role in OpsCenter. Specify the value of the new attribute so that OpsCenter can inspect the user attribute.

    group_search_type Defines how group membership is determined for a user. Available options:
    • directory_search: (default) Performs a subtree search of group_search_base using group_search_filter to filter the results.
    • memberof_search: gets groups from the user_memberof_attribute of a user. Using this option requires the directory server to have memberof support. When using the memberof_search rather than directory_search for group searches, you do not need to specify the group_search_base or group_search_filter options.
    user_memberof_stores_dn Set to True if the memberof attribute's value is distinguished names of groups. This option must be set to True when configuring Active Directory, OpenLDAP, or when any other LDAP implementation returns a DN for the memberOf attribute value.
    Note: If using an Oracle LDAP implementation, this option should be set to True if user_memberof_attribute is set to isMemberOf.
    Default: False.

    Set user_memberof_stores_dn to False if the attribute specified by user_memberof_attribute denotes 0 or more group names that correspond to the roles in OpsCenter. For example, if the user_memberof_attribute is set to employeeType, set the user_memberof_stores_dn option to False because the employeeType attribute value is not a distinguished name.

    Tip: If the user_memberof_attribute_stores_dn is False and log in fails, and OpsCenter suspects the group name might be a DN, a warning is logged:

    [opscenterd] WARN: It looks like you might be using Active Directory for authentication. You may need to set the 'user_memberof_attribute_stores_dn' config value to True and set the group_name_attribute config value appropriately in opscenterd.conf.

    ldap_security The type of security to use with LDAP: None, TLS, SSL. When set to TLS, uses TLS start. Setting this option to TLS or SSL sets the uri_scheme to LDAPS. Setting this option to None sets the uri_scheme to LDAP.
    truststore Path to the truststore for SSL certificates.
    truststore_type Type of the truststore. Default: JKS (Java Keystore).
    truststore_pass The password to access the truststore.
    connection_timeout The number of seconds to wait before concluding that the LDAP server is down. Default: 20 seconds.
    The following example configuration reflects a typical SSL LDAP (OpenLDAP or Oracle) implementation. The server_port value of 636 is for an SSL configuration. If the search_dn and search_password shown in lines 10 and 11 are omitted, LDAP attempts to make an anonymous bind to perform the user search. This configuration example searches for a user in both user and group categories to authenticate a user (user_search_base and user_search_filter; group_search_base and group_search_filter). The group_search_type is directory_search. Note that #user_search_base and #user_search_filter are commented out in lines 14 and 15 because they are only applicable to AD configuration.
    01  [authentication] 
    02   passwd_db = ./passwd.db
    03   enabled = True
    04   authentication_method = LDAP
    06   [ldap] 
    07   server_host = ldap.myCompany.lan
    08   server_port = 636
    09   uri_scheme = ldaps
    10   search_dn = cn=admin,dc=devldap,dc=datastax,dc=lan 
    11   search_password = ****
    12   user_search_base = ou=users,dc=devldap,dc=datastax,dc=lan
    13   user_search_filter = (uid={0})
    14   #user_search_base = CN=search,CN=Users,DC=datastax,DC=internal # AD base
    15   #user_search_filter = (sAMAccountName={0}) # AD filter
    16   group_search_base = ou=users,dc=devldap,dc=datastax,dc=lan
    17   group_search_filter_with_dn = (member={0})
    18   group_name_attribute = cn
    19   group_search_type = directory_search 
    20   admin_group_name = superusers,superusers2
    21   ldap_security = SSL_TLS
    22   truststore_type = JKS
    23   truststore = ./truststore.jks 
    24   truststore_pass = secret
    The following example reflects an Active Directory (AD) for Windows 2008 configuration. Note that unlike the LDAP example above for OpenLDAP or Oracle, this AD config makes use of user_search_base line 12 and user_search_filter in line 13 for Active Directory configuration options. Also note the different user search base for AD shown in line 12. The user_memberof_stores_dn option in line 18 is explicitly set to True so that OpsCenter correctly handles the value of the memberof attribute shown in line 17 as a distinguished name (DN). The user_memberof_stores_dn option is also applicable to an OpenLDAP configuration.
    01  [authentication] 
    02   passwd_db = ./passwd.db
    03   enabled = True
    04   authentication_method = LDAP
    06  [ldap]
    07  server_host = mywin2008.myCompany.lan
    08  server_port = 636
    09  uri_scheme = ldap
    10  search_dn = CN=Administrator,CN=Users,DC=prodwin2008,DC=datastax,DC=lan
    11  search_password = ****
    12  user_search_base = CN=Users,DC=prodwin2008,DC=datastax,DC=lan # AD base
    13  user_search_filter = (sAMAccountName={0}) # AD filter
    14  admin_group_name = superusers
    15  group_search_type = memberof_search
    16  group_name_attribute = cn
    17  user_memberof_attribute = memberof
    18  user_memberof_stores_dn = True
    19  ldap_security = SSL_TLS
    20  truststore_type = JKS
    21  truststore = /tmp/path_to_truststore_win2008
    22  truststore_pass = secret
  4. Restart OpsCenter for the changes to take effect.