Datacenters a list of the DCs in the cluster.

AdditionalSeeds specifies DSE node IPs for an existing datacenter. This is primarily intended for migrations from an existing DSE cluster that is not managed by k8ssandra-operator.

Whether to enable authentication in this cluster. The default is true; it is highly recommended to always leave authentication turned on.

CDC defines the desired state for CDC integrations. It can be used to feed mutation events from Cassandra into an Apache Pulsar cluster, from where they can be expored to external systems.

Client encryption stores which are used by DSE.

Override the DSE cluster name. If unspecified, the cluster name will be the same as the K8ssandraCluster CRD name.

CassandraConfig contains configuration settings that are applied to cassandra.yaml, dse.yaml and the various jvm*.options files.

Containers defines containers to be deployed in each Cassandra pod.

When true, create a self signed issuer to sign all downstream certificates. If false, a custom issuerRef may be specified in the encryption.internodeEncyption.certs.certTemplate.issuerRef field.

DatacenterName allows to override the name of the Cassandra datacenter. Kubernetes objects will be named after a sanitized version of it if set, and if not metadata.name.

During a migration the operator should alter keyspaces replication settings including the following external DCs.

Volumes defines additional volumes to be added to each Cassandra pod. If the volume uses a PersistentVolumeClaim, the PVC will be managed by the statefulset.

InitContainers defines init-containers to be deployed in each Cassandra pod.

Deprecated: JMX security is now based on CQL roles. We don’t need an init container to configure JMX authentication anymore. The value of this field will be ignored.

ManagementApiAuth defines the authentication settings for the management API in the Cassandra pods.

MgmtAPIHeap defines the amount of memory devoted to the management api heap.

Networking enables host networking and configures a NodePort ports.

The image to use in each Cassandra pod for the (short-lived) init container that merges global and perNodeConfig configuration. This is only useful when PerNodeConfigMapRef is set.

PodSecurityContext defines the security context for the Cassandra pods.

Racks is a list of named racks. Note that racks are used to create node affinity. //

Resources is the cpu and memory resources for the cassandra container.

Internode encryption stores which are used by DSE.

ServerImage is the image for the cassandra container. Note that this should be a management-api image. If left empty the operator will choose a default image based on ServerVersion.

ServerVersion is the Cassandra or DSE version. The following versions are supported: - Cassandra: 3.11.X, 4.X.X and 5.X.X - DSE: 6.8.X, 7.x.x

The k8s service account to use for the Cassandra pods

SoftPodAntiAffinity sets whether multiple Cassandra instances can be scheduled on the same node.

StorageConfig is the persistent storage requirements for each Cassandra pod. This includes everything under /var/lib/cassandra, namely the commit log and data directories.

The reference to the superuser secret to use for DSE.

Telemetry defines the desired state for telemetry resources in this datacenter.

Tolerations applied to every Cassandra pod.

Size is the number DSE pods to deploy in this datacenter. This number does not include Stargate instances.

CDC defines the desired state for CDC integrations. It can be used to feed mutation events from Cassandra into an Apache Pulsar cluster, from where they can be expored to external systems.

CassandraConfig contains configuration settings that are applied to cassandra.yaml, dse.yaml and the various jvm*.options files.

Containers defines containers to be deployed in each Cassandra pod.

DatacenterName allows to override the name of the Cassandra datacenter. Kubernetes objects will be named after a sanitized version of it if set, and if not metadata.name.

Volumes defines additional volumes to be added to each Cassandra pod. If the volume uses a PersistentVolumeClaim, the PVC will be managed by the statefulset.

InitContainers defines init-containers to be deployed in each Cassandra pod.

Deprecated: JMX security is now based on CQL roles. We don’t need an init container to configure JMX authentication anymore. The value of this field will be ignored.

ManagementApiAuth defines the authentication settings for the management API in the Cassandra pods.

MgmtAPIHeap defines the amount of memory devoted to the management api heap.

Networking enables host networking and configures a NodePort ports.

The image to use in each Cassandra pod for the (short-lived) init container that merges global and perNodeConfig configuration. This is only useful when PerNodeConfigMapRef is set.

PerNodeConfigMapRef is a reference to a ConfigMap that contains per-node configuration for this DC. The ConfigMap is expected to have entries in the following form: <pod-name>_<file-name>.

PodSecurityContext defines the security context for the Cassandra pods.

Racks is a list of named racks. Note that racks are used to create node affinity. //

Resources is the cpu and memory resources for the cassandra container.

ServerImage is the image for the cassandra container. Note that this should be a management-api image. If left empty the operator will choose a default image based on ServerVersion.

ServerVersion is the Cassandra or DSE version. The following versions are supported: - Cassandra: 3.11.X, 4.X.X and 5.X.X - DSE: 6.8.X, 7.x.x

The k8s service account to use for the Cassandra pods

SoftPodAntiAffinity sets whether multiple Cassandra instances can be scheduled on the same node.

Stopped means that the datacenter will be stopped. Use this for maintenance or for cost saving.

StorageConfig is the persistent storage requirements for each Cassandra pod. This includes everything under /var/lib/cassandra, namely the commit log and data directories.

Telemetry defines the desired state for telemetry resources in this datacenter.

Tolerations applied to every Cassandra pod.

Jvm11ServerOptions are additional options that will be passed on to the jvm11-server-options file.

Jvm8ServerOptions are additional options that will be passed on to the jvm8-server-options file.

JvmServerOptions are additional options that will be passed on to the jvm-server-options file.

Additional, arbitrary JVM options which are written into the cassandra-env.sh file.

Available CPU processors. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Disable remote configuration via JMX of auth caches. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.

Defines how to handle INSERT requests with TTL exceeding the maximum supported expiration date. Possible values include REJECT, CAP, CAP_NOWARN. Cass Config Builder: supported for Cassandra 4.

Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -Dcassandra.force_3_0_protocol_version=true.

Disable dynamic calculation of the page size used when indexing an entire partition (during initial index build/rebuild). Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.

Imposes an upper bound on hint lifetime below the normal min gc_grace_seconds. Disabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Dcassandra.

Enable pluggable metrics reporter. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Amount of time in milliseconds that a node waits before joining the ring. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Default location for the trigger JARs. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

For testing new compaction and compression strategies. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.

Disable honoring user code @Contended annotations. Enabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:-RestrictContended.

Enable Flight Recorder (Use in production is subject to Oracle licensing). Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Listen for JVM remote debuggers on port 1414. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.

Make Cassandra JVM log internal method compilation (developers only). Disabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:+LogCompilation.

Whether the compiler should generate the necessary metadata for the parts of the code not at safe points as well. For use with Flight Recorder. Enabled by default.

Preserve Frame Pointer. Enabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:+PreserveFramePointer.

Unlock commercial features. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Enabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:+UnlockDiagnosticVMOptions.

The name of the garbage collector to use. Depending on the Cassandra version, not all values are supported: Cassandra 3.11 supports only G1GC and CMS; Cassandra 4.

Disabled by default. Can only be used when CMS garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -Xmn.

Defaults to 75. Can only be used when CMS garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:CMSInitiatingOccupancyFraction.

Defaults to 1. Can only be used when CMS garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:MaxTenuringThreshold.

Defaults to 8. Can only be used when CMS garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:SurvivorRatio.

Defaults to 10000. Can only be used when CMS garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:CMSWaitDuration.

Concurrent GC Threads. Can only be used when G1 garbage collector is used. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Initiating Heap Occupancy Percentage. Can only be used when G1 garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

G1GC Max GC Pause in milliseconds. Defaults to 500. Can only be used when G1 garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Parallel GC Threads. Can only be used when G1 garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.

G1GC Updating Pause Time Percentage. Defaults to 5. Can only be used when G1 garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Print GC Application Stopped Time. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+PrintGCApplicationStoppedTime.

Print GC Date Stamps. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+PrintGCDateStamps.

Print GC details. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+PrintGCDetails.

Print FLSS Statistics. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:PrintFLSStatistics=1.

Print Heap at GC. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+PrintHeapAtGC.

Size of each log file. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:GCLogFileSize.

Number of GC log files. Disabled by default. Can only be used when the G1 garbage collector is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Print promotion failure. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+PrintPromotionFailure.

Print tenuring distribution. Defaults to false. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+PrintTenuringDistribution.

Whether to print GC logs to /var/log/cassandra/gc.log. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -Xloggc:/var/log/cassandra/gc.log.

Use GC Log File Rotation. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Corresponds to: -XX:+UseGCLogFileRotation.

Deprecated. Use gc_cms_heap_size_young_generation instead. Valid for CMS garbage collector only + Cassandra 3.11.

Deprecated. Use heap_initial_size and heap_max_size instead. If this field is defined, it applies to both max_heap_size and initial_heap_size.

Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Xms.

Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Xmx.

Allow the current VM to attach to itself. Defaults to true. Cass Config Builder: supported for Cassandra 4.0 in jvm11-server.options. Corresponds to: -Djdk.attach.allowAttachSelf=true.

Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Possible values for 3.

Disabled by default. Defaults to 7199. TODO Make Reaper aware of the JMX port if a non-default port is used. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Defaults to false.

Remote SSL options. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Require Client Authentication for remote SSL? Defaults to false. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Defaults to 65536. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Dio.netty.eventLoop.maxPendingTasks.

Netty setting io.netty.tryReflectionSetAccessible. Defaults to true. Cass Config Builder: supported for Cassandra 4.0 in jvm11-server.options. Corresponds to: -Dio.netty.

Align direct memory allocations on page boundaries. Enabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Dsun.nio.PageAlignDirectMemory=true.

Defaults to 1048576. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Djdk.nio.maxCachedBufferSize.

Ensure all memory is faulted and zeroed on startup. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.

Disabled by default. Requires exit_on_out_of_memory_error to be disabled.. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:+CrashOnOutOfMemoryError.

Disable biased locking to avoid biased lock revocation pauses. Disabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.

Disable hsperfdata mmap’ed file. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Enable assertions. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -ea.

Enable lowering thread priority without being root on linux. See CASSANDRA-1181 for details. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Enable thread priorities. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Disabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:+ExitOnOutOfMemoryError.

Defaults to 300000 milliseconds. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:GuaranteedSafepointInterval.

Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Per-thread stack size. Defaults to 256Ki. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Prefer binding to IPv4 network interfaces. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Disabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -Dcassandra.printHeapHistogramOnOutOfMemoryError.

Allow resizing of thread-local allocation blocks. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.

The size of interned string table. Larger sizes are beneficial to gossip. Defaults to 1000003. Cass Config Builder: supported for Cassandra 3.11 in jvm.options.

Enabled by default. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options. Corresponds to: -XX:+UseNUMA.

Enable thread-local allocation blocks. Enabled by default. Cass Config Builder: supported for Cassandra 3.11 in jvm.options. Cass Config Builder: supported for Cassandra 4.0 in jvm-server.options.

Name of the container specified as a DNS_LABEL. Each container in a pod must have a unique name (DNS_LABEL). Cannot be updated.

Arguments to the entrypoint. The container image’s CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment.

Entrypoint array. Not executed within a shell. The container image’s ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container’s environment.

List of environment variables to set in the container. Cannot be updated.

List of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER.

Container image name. More info: https://kubernetes.

Image pull policy. One of Always, Never, IfNotPresent. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. Cannot be updated. More info: https://kubernetes.

Actions that the management system should take in response to container lifecycle events. Cannot be updated.

Periodic probe of container liveness. Container will be restarted if the probe fails. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.

Periodic probe of container service readiness. Container will be removed from service endpoints if the probe fails. Cannot be updated. More info: https://kubernetes.

Compute Resources required by this container. Cannot be updated. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

SecurityContext defines the security options the container should be run with. If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext.

StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully.

Whether this container should allocate a buffer for stdin in the container runtime. If this is not set, reads from stdin in the container will always result in EOF. Default is false.

Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions.

Optional: Path at which the file to which the container’s termination message will be written is mounted into the container’s filesystem.

Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure.

Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. Default is false.

volumeDevices is the list of block devices to be used by the container.

Pod volumes to mount into the container’s filesystem. Cannot be updated.

Container’s working directory. If not specified, the container runtime’s default will be used, which might be configured in the container image. Cannot be updated.

Name of the environment variable. Must be a C_IDENTIFIER.

Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables.

Source for the environment variable’s value. Cannot be used if value is not empty.

Selects a key of a ConfigMap.

Selects a field of the pod: supports metadata.name, metadata.namespace, metadata.labels['<KEY>'], metadata.annotations['<KEY>'], spec.nodeName, spec.serviceAccountName, status.hostIP, status.

Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.

Selects a key of a secret in the pod’s namespace

The key to select.

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

Specify whether the ConfigMap or its key must be defined

Path of the field to select in the specified API version.

Version of the schema the FieldPath is written in terms of, defaults to "v1".

Required: resource to select

Container name: required for volumes, optional for env vars

Specifies the output format of the exposed resources, defaults to "1"

The key of the secret to select from. Must be a valid secret key.

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

Specify whether the Secret or its key must be defined

The ConfigMap to select from

An optional identifier to prepend to each key in the ConfigMap. Must be a C_IDENTIFIER.

The Secret to select from

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

Specify whether the ConfigMap must be defined

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

Specify whether the Secret must be defined

PostStart is called immediately after a container is created. If the handler fails, the container is terminated and restarted according to its restart policy.

PreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc.

Exec specifies the action to take.

HTTPGet specifies the http request to perform.

Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility.

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem.

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

Custom headers to set in the request. HTTP allows repeated headers.

Path to access on the HTTP server.

Scheme to use for connecting to the host. Defaults to HTTP.

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

The header field value

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Optional: Host name to connect to, defaults to the pod IP.

Exec specifies the action to take.

HTTPGet specifies the http request to perform.

Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept for the backward compatibility.

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem.

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

Custom headers to set in the request. HTTP allows repeated headers.

Path to access on the HTTP server.

Scheme to use for connecting to the host. Defaults to HTTP.

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

The header field value

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Optional: Host name to connect to, defaults to the pod IP.

Exec specifies the action to take.

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.

HTTPGet specifies the http request to perform.

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

TCPSocket specifies an action involving a TCP port.

Optional duration in seconds the pod needs to terminate gracefully upon probe failure.

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem.

Port number of the gRPC service. Number must be in the range 1 to 65535.

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

Custom headers to set in the request. HTTP allows repeated headers.

Path to access on the HTTP server.

Scheme to use for connecting to the host. Defaults to HTTP.

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

The header field value

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Optional: Host name to connect to, defaults to the pod IP.

Number of port to expose on the pod’s IP address. This must be a valid port number, 0 < x < 65536.

What host IP to bind the external port to.

Number of port to expose on the host. If specified, this must be a valid port number, 0 < x < 65536. If HostNetwork is specified, this must match ContainerPort. Most containers do not need this.

If specified, this must be an IANA_SVC_NAME and unique within the pod. Each named port in a pod must have a unique name. Name for the port that can be referred to by services.

Protocol for port. Must be UDP, TCP, or SCTP. Defaults to "TCP".

Exec specifies the action to take.

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.

HTTPGet specifies the http request to perform.

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

TCPSocket specifies an action involving a TCP port.

Optional duration in seconds the pod needs to terminate gracefully upon probe failure.

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem.

Port number of the gRPC service. Number must be in the range 1 to 65535.

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

Custom headers to set in the request. HTTP allows repeated headers.

Path to access on the HTTP server.

Scheme to use for connecting to the host. Defaults to HTTP.

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

The header field value

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Optional: Host name to connect to, defaults to the pod IP.

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

Requests describes the minimum amount of compute resources required.

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process.

The capabilities to add/drop when running containers. Defaults to the default set of capabilities granted by the container runtime. Note that this field cannot be set when spec.os.name is windows.

Run container in privileged mode. Processes in privileged containers are essentially equivalent to root on the host. Defaults to false. Note that this field cannot be set when spec.os.name is windows.

procMount denotes the type of proc mount to use for the containers. The default is DefaultProcMount which uses the container runtime defaults for readonly paths and masked paths.

Whether this container has a read-only root filesystem. Default is false. Note that this field cannot be set when spec.os.name is windows.

The GID to run the entrypoint of the container process. Uses runtime default if unset. May also be set in PodSecurityContext.

Indicates that the container must run as a non-root user.

The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in PodSecurityContext.

The SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext.

The seccomp options to use by this container. If seccomp options are provided at both the pod & container level, the container options override the pod options.

The Windows specific settings applied to all containers. If unspecified, the options from the PodSecurityContext will be used.

Added capabilities

Removed capabilities

Level is SELinux level label that applies to the container.

Role is a SELinux role label that applies to the container.

Type is a SELinux type label that applies to the container.

User is a SELinux user label that applies to the container.

type indicates which kind of seccomp profile will be applied. Valid options are:

Localhost - a profile defined in a file on the node should be used.

localhostProfile indicates a profile defined in a file on the node should be used. The profile must be preconfigured on the node to work.

GMSACredentialSpec is where the GMSA admission webhook (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the GMSA credential spec named by the GMSACredentialSpecName field.

GMSACredentialSpecName is the name of the GMSA credential spec to use.

HostProcess determines if a container should be run as a 'Host Process' container.

The UserName in Windows to run the entrypoint of the container process. Defaults to the user specified in image metadata if unspecified. May also be set in PodSecurityContext.

Exec specifies the action to take.

Minimum consecutive failures for the probe to be considered failed after having succeeded. Defaults to 3. Minimum value is 1.

GRPC specifies an action involving a GRPC port. This is a beta field and requires enabling GRPCContainerProbe feature gate.

HTTPGet specifies the http request to perform.

Number of seconds after the container has started before liveness probes are initiated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

How often (in seconds) to perform the probe. Default to 10 seconds. Minimum value is 1.

Minimum consecutive successes for the probe to be considered successful after having failed. Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1.

TCPSocket specifies an action involving a TCP port.

Optional duration in seconds the pod needs to terminate gracefully upon probe failure.

Number of seconds after which the probe times out. Defaults to 1 second. Minimum value is 1. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes

Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container’s filesystem.

Port number of the gRPC service. Number must be in the range 1 to 65535.

Service is the name of the service to place in the gRPC HealthCheckRequest (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md).

Name or number of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Host name to connect to, defaults to the pod IP. You probably want to set "Host" in httpHeaders instead.

Custom headers to set in the request. HTTP allows repeated headers.

Path to access on the HTTP server.

Scheme to use for connecting to the host. Defaults to HTTP.

The header field name. This will be canonicalized upon output, so case-variant names will be understood as the same header.

The header field value

Number or name of the port to access on the container. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME.

Optional: Host name to connect to, defaults to the pod IP.

devicePath is the path inside of the container that the device will be mapped to.

name must match the name of a persistentVolumeClaim in the pod

Path within the container at which the volume should be mounted. Must not contain ':'.

This must match the Name of a Volume.

mountPropagation determines how mounts are propagated from the host to container and the other way around. When not set, MountPropagationNone is used. This field is beta in 1.10.

Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false.

Path within the volume from which the container’s volume should be mounted. Defaults to "" (volume’s root).

Expanded path within the volume from which the container’s volume should be mounted.

PVCs defines additional volumes to be added to each Cassandra pod and managed by the statefulset. Such volumes are automatically mounted by cass-operator into the cassandra containers.

Volumes defines volumes to be added to each Cassandra pod.

Mount path into cassandra container

Name of the pvc / volume

PVCSpec is a persistent volume claim spec. Either this or VolumeSource is required.

VolumeSource to mount the volume from (such as ConfigMap / Secret). This or PVCSpec is required.

accessModes contains the desired access modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1

dataSource field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.

dataSourceRef specifies the object from which to populate the volume with data, if a non-empty volume is desired.

resources represents the minimum resources the volume should have.

selector is a label query over volumes to consider for binding.

storageClassName is the name of the StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1

volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec.

volumeName is the binding reference to the PersistentVolume backing this claim.

Kind is the type of resource being referenced

Name is the name of resource being referenced

APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.

Kind is the type of resource being referenced

Name is the name of resource being referenced

APIGroup is the group for the resource being referenced. If APIGroup is not specified, the specified Kind must be in the core API group. For any other third-party types, APIGroup is required.

Namespace is the namespace of resource being referenced Note that when a namespace is specified, a gateway.networking.k8s.

Claims lists the names of resources, defined in spec.resourceClaims, that are used by this container.

This is an alpha field and requires enabling the DynamicResourceAllocation feature gate.

Limits describes the maximum amount of compute resources allowed. More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/

Requests describes the minimum amount of compute resources required.

Name must match the name of one entry in pod.spec.resourceClaims of the Pod where this field is used. It makes that resource available inside a container.

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchLabels is a map of {key,value} pairs.

key is the label key that the selector applies to.

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty.

awsElasticBlockStore represents an AWS Disk resource that is attached to a kubelet’s host machine and then exposed to the pod. More info: https://kubernetes.

azureDisk represents an Azure Data Disk mount on the host and bind mount to the pod.

azureFile represents an Azure File Service mount on the host and bind mount to the pod.

cephFS represents a Ceph FS mount on the host that shares a pod’s lifetime

cinder represents a cinder volume attached and mounted on kubelets host machine. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

configMap represents a configMap that should populate this volume

csi (Container Storage Interface) represents ephemeral storage that is handled by certain external CSI drivers (Beta feature).

downwardAPI represents downward API about the pod that should populate this volume

emptyDir represents a temporary directory that shares a pod’s lifetime. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir

ephemeral represents a volume that is handled by a cluster storage driver.

fc represents a Fibre Channel resource that is attached to a kubelet’s host machine and then exposed to the pod.

flexVolume represents a generic volume resource that is provisioned/attached using an exec based plugin.

flocker represents a Flocker volume attached to a kubelet’s host machine. This depends on the Flocker control service being running

gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet’s host machine and then exposed to the pod. More info: https://kubernetes.

gitRepo represents a git repository at a particular revision. DEPRECATED: GitRepo is deprecated.

glusterfs represents a Glusterfs mount on the host that shares a pod’s lifetime. More info: https://examples.k8s.io/volumes/glusterfs/README.md

hostPath represents a pre-existing file or directory on the host machine that is directly exposed to the container.

iscsi represents an ISCSI Disk resource that is attached to a kubelet’s host machine and then exposed to the pod. More info: https://examples.k8s.io/volumes/iscsi/README.md

nfs represents an NFS mount on the host that shares a pod’s lifetime More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs

persistentVolumeClaimVolumeSource represents a reference to a PersistentVolumeClaim in the same namespace. More info: https://kubernetes.

photonPersistentDisk represents a PhotonController persistent disk attached and mounted on kubelets host machine

portworxVolume represents a portworx volume attached and mounted on kubelets host machine

projected items for all in one resources secrets, configmaps, and downward API

quobyte represents a Quobyte mount on the host that shares a pod’s lifetime

rbd represents a Rados Block Device mount on the host that shares a pod’s lifetime. More info: https://examples.k8s.io/volumes/rbd/README.md

scaleIO represents a ScaleIO persistent volume attached and mounted on Kubernetes nodes.

secret represents a secret that should populate this volume. More info: https://kubernetes.io/docs/concepts/storage/volumes#secret

storageOS represents a StorageOS volume attached and mounted on Kubernetes nodes.

vsphereVolume represents a vSphere volume attached and mounted on kubelets host machine

volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

fsType is the filesystem type of the volume that you want to mount. Tip: Ensure that the filesystem type is supported by the host operating system. Examples: "ext4", "xfs", "ntfs".

partition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1".

readOnly value true will force the readOnly setting in VolumeMounts. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore

diskName is the Name of the data disk in the blob storage

diskURI is the URI of data disk in the blob storage

cachingMode is the Host Caching mode: None, Read Only, Read Write.

fsType is Filesystem type to mount. Must be a filesystem type supported by the host operating system. Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

kind expected values are Shared: multiple blob disks per storage account Dedicated: single blob disk per storage account Managed: azure managed data disk (only in managed availability set).

readOnly Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

secretName is the name of secret that contains Azure Storage Account Name and Key

shareName is the azure share Name

readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts.

monitors is Required: Monitors is a collection of Ceph monitors More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

path is Optional: Used as the mounted root, rather than the full Ceph tree, default is /

readOnly is Optional: Defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

user is optional: User is the rados user name, default is admin More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

volumeID used to identify the volume in cinder. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

fsType is the filesystem type to mount. Must be a filesystem type supported by the host operating system. Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified.

readOnly defaults to false (read/write). ReadOnly here will force the ReadOnly setting in VolumeMounts. More info: https://examples.k8s.io/mysql-cinder-pd/README.md

secretRef is optional: points to a secret object containing parameters used to connect to OpenStack.

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

defaultMode is optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.

items if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value.

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

optional specify whether the ConfigMap or its keys must be defined

key is the key to project.

path is the relative path of the file to map the key to. May not be an absolute path. May not contain the path element '..'. May not start with the string '..'.

mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.

driver is the name of the CSI driver that handles this volume. Consult with your admin for the correct name as registered in the cluster.

fsType to mount. Ex. "ext4", "xfs", "ntfs". If not provided, the empty value is passed to the associated CSI driver which will determine the default filesystem to apply.

nodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls.

readOnly specifies a read-only configuration for the volume. Defaults to false (read/write).

volumeAttributes stores driver-specific properties that are passed to the CSI driver. Consult your driver’s documentation for supported values.

Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names TODO: Add other useful fields. apiVersion, kind, uid?

Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default.

Items is a list of downward API volume file

Required: Path is the relative path name of the file to be created. Must not be absolute or contain the '..' path. Must be utf-8 encoded. The first item of the relative path must not start with '..'

Required: Selects a field of the pod: only annotations, labels, name and namespace are supported.

Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511.

Selects a resource of the container: only resources limits and requests (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported.

Path of the field to select in the specified API version.

Version of the schema the FieldPath is written in terms of, defaults to "v1".

Required: resource to select

Container name: required for volumes, optional for env vars

Specifies the output format of the exposed resources, defaults to "1"

medium represents what type of storage medium should back this directory. The default is "" which means to use the node’s default medium. Must be an empty string (default) or Memory.

sizeLimit is the total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium.

Will be used to create a stand-alone PVC to provision the volume. The pod in which this EphemeralVolumeSource is embedded will be the owner of the PVC, i.e.

The specification for the PersistentVolumeClaim. The entire content is copied unchanged into the PVC that gets created from this template.

May contain labels and annotations that will be copied into the PVC when creating it. No other fields are allowed and will be rejected during validation.

accessModes contains the desired access modes the volume should have. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1

dataSource field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.

dataSourceRef specifies the object from which to populate the volume with data, if a non-empty volume is desired.

resources represents the minimum resources the volume should have.

selector is a label query over volumes to consider for binding.

storageClassName is the name of the StorageClass required by the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1

volumeMode defines what type of volume is required by the claim. Value of Filesystem is implied when not included in claim spec.

volumeName is the binding reference to the PersistentVolume backing this claim.